ICONSIGN Brow Lamination Tutorials Step By Step

Welcome to our ICONSIGN blog of how to use lash & brow lift kit!

Our ICONSIGN Brow Lift Kit is used for lifting and laminating brows to achieve a fuller, more groomed appearance. It involves applying a series of solutions that reshape and fix your brow hairs into place. Perfect for people with messy or rarely growing eyebrows, remodel the direction and shape of your eyebrows, make them look fuller, longer and bushier, the lamination effect will last 6-8 weeks.

In the opinion of professionals, the process of brow lamination is simpler than lash lift, what You’ll Need:

Iconsign Brow Lift Kit (with perm solution, fixing solution, nutrition solution, and cleanser)

Plastic wrap or cling film

Cotton swabs, spoolie, or brow brush

Micro brush (usually included in the kit)

Cotton pads (optional)

Timer

Step-by-Step Instructions:

1. Clean your brows:

Before you begin the treatment, we recommend to make sure the skin around your eyebrows is as clean and as oil-free as possible. Oily skin or make-up can prevent the lotions from working. Dirt or residue on the eyebrows and skin prevent the brow glue from sticking properly.

Make sure to remove all make-up or residue before the treatment by using our ICONSIGN Cleanser (optional) or your daily face wash. We recommend using a baby shampoo as this has a PH of 5.5 or more, and it can open up hair flakes, making gluing much easier.

Note:

Make sure your eyebrows are dry by patting them with a tissue.

Starting with a clean canvas also allows the different lotions to work more efficiently.

Work against the direction of hair growth to clean the skin under the eyebrows as well.

2. Apply the perm solution:

Using a micro brush or cotton swab, apply the perm solution (usually labeled as Step 1) evenly across your brows. Focus on the root of the brow hairs.

Cover the brows with plastic wrap or cling film. This helps the solution work more effectively.

Let it sit for 8-12 minutes, depending on your hair thickness.

3. Remove the perm solution:

Gently remove the plastic wrap and wipe off the perm solution using a dry cotton pad or tissue. Be careful not to disturb the shape of your brows.

4. Apply the fixing solution:

Apply the fixing solution (labeled as Step 2) to your brows, following the same steps as the perm solution.
Again, cover with plastic wrap and let it sit for 8-12 minutes.

5. Clean the brows:

Remove the plastic wrap and clean off the fixing solution with a cotton pad or the cleanser included in the kit.

6. Apply the nutrition solution:

Apply the nutrition solution (labeled as Step 3) to nourish and hydrate your brows. This will help keep the brow hairs healthy after the chemical process.

7. Final touch-ups:

Use a spoolie to brush your brows into the final shape you want. Let them set naturally without touching for the next few hours.

8. Post-Treatment Care:

Avoid getting your brows wet for the first 24 hours.

Avoid makeup and oily products on the brow area for the next 24-48 hours.

Brush your brows daily to keep them looking lifted and neat.

This should give you beautifully laminated brows for up to 6-8 weeks!

Must do ICONSIGN Brow Lamintion Aftercare:

1. Avoid contact of your eyebrows with water, steam, hot baths, saunas after the application for 24–48 hours.

2. Avoid oils, shampoo and lotions for 24–48 hours.

3. Avoid eyebrow make up for 24 hours.

4. Avoid rubbing or pulling your eyebrows for 24 hours.

Sleep on your back for 48 hours! Since your eyebrows are still shape-shifting, sleeping on your side or putting pressure on your eyebrows can leave them misshaped.

Recommended to do:

Use an oil-free makeup remover.

Avoid aggressive products.

To keep your eyebrows fluffy-looking and to prevent them from getting tangled, brush them daily. You can use an eyebrow brush (especially made for this purpose).

Users Notice:

Please note before use: Despite multiple tested ingredients and no intolerance confirmed so far by our customers, please test the product for skin compatibility before use (test small amount on the back of the hand). Keep the eye closed during application and remove contact lenses.

Lifts may be repeated as often as you want, but we recommend to wait at least 2 weeks to avoid over-processing. This means that if you want to freshen up your lift after a week or two, it’s absolutely fine!

Incorrect application may cause irritation to the eye (avoid eye contact). If eye contact occurs, please rinse with water for 3–5 minutes and seek medical attention if necessary.

ICONSIGN Cosmetics is not responsible for any damages caused by this product or improper use. Keep away from children.