ICONSIGN Tint Set Tutorial Step By Step
Welcome to our ICONSIGN blog of how to use lash & brow lift kit!
Today, we will teach you how to use our ICONSIGN brow tint kit, first our 2-In-1 eyelash & eyebrow kit, professional lash & bow color kit, lasting for 6 weeks DIY hair coloring for salon home use.
So, Follow these steps for your brow:
STEP 1: CLEAN IT
Thoroughly clean the eyebrows before use. Before the first treatment, or after a longer break from coloring, please do a patch test.
Tools: Cotton Pad, Cleanser/ Oilfree Make-up Remover, Cotton Swab
STEP 2: MIX IT
Put a pea size of the tint and oxidant gel (squeeze about 1 cm of each cream out of the tube) into a glass/bowl and mix until it has a creamy consistency, 1:1 mixing ratio.
Tools: Tint, Oxidant Gel, Glass/Bowl, Brush
STEP 3: TINT IT
Apply the mixed color with the color brush in the direction of growth of the eyebrows. You can correct any mistakes with a cotton swab. Let it take effect for 5-10 minutes. (2-3 minutes for a light result)
Optional: Before applying, cover the area around your eyebrows with vaseline to protect your skin.
Tools: Brush, Tint, Cotton Swab
STEP 4: TAKE IT OFF
Remove the color with some wet cotton pads. After you have removed all the color, comb your eyebrows with a brush.
Tools: Cotton Pad, Lash Brush
For eyelashes steps:
For Eyelashes:
In case you're using this while also using the ICONSIGN Lash lift Set, proceed to Step 2 and ignore Step 1 because your lashes are already fixed.
STEP 1: CLEAN IT
Before your first treatment or after a long dye break, please do a patch test. This does not guarantee that there will be no reaction during the treatment! Remove contact lenses before you dye your lashes. We recommend doing one eye at a time!
Before application, clean the area around your eyes with a cleanser. Put the 'Lash Papers'' as close to your lash line as possible. Use some vaseline to properly attach the ''Lash Paper''.
Tools: Cleanser/Oilfree Make-up Remover, Cotton Swab, Cotton Pads
STEP 2: MIX IT
Put a pea size of the tint and oxidant gel (squeeze about 1 cm of each cream out of the tube) into a glass/bowl and mix until it has a creamy consistency, 1:1 mixing ratio.
Tools: Tint, Oxidant Gel, Glass/Bowl, Brush
STEP 3: TINT IT
Apply the mixed color generously on all of your lashes, from the lash line to the tip of your lashes. Close your eye while applying to prevent the color from entering your eyes. Let it process for 10 minutes. Carefully remove the color (this works best if you tighten your eyelid) and repeat those steps on your other eye (2-3 minutes for a light result)!
Tools: Brush, Tint
STEP 4: TAKE IT OFF
Remove the color and the ''Lash Paper'', without using too much pressure, with a wet cotton pad from your eyes. Wipe from the inside to the outside, so nothing will enter your eyes. Repeat this until there is no color residue left.
Important: In case some color gets into your eyes, rinse thoroughly with water!
Tools: Cotton Pad, Lash Brush
Our store has 2 style brow & lash tint, which we recommend is this one:
No need to debug, we have already debugged the colors for you, you can start operating directly, very convenient, our upgrade kit tint for lash & brow!
If you still have problem of use, you can send us email or chat online, our expert will reply you as soon as possible.
